Manitoba, South Saskatchewan & North Midwest USA From AMC Foam.
Regionally Available
KD Taper Top
Use this KD panel in combination with a KD Standard panel to assemble a Taper Top form. Taper Tops are often placed in the top course of a Logix wall to provide a flat and smooth surface with more bearing surface for floor, roof or wall framing connections, or to support a brick veneer for above grade wood-framed walls.
Product Dimensions
| 4″ (102mm) | 6.25″ (159mm) | 8″ (203mm) | 10″ (254mm) | 12″ (305mm) | > 12″ | |
|---|---|---|---|---|---|---|
| Conc Corbel Length | n/a | 8″ (203mm) | 9.75″ (248mm) | 11.75″ (298mm) | 13.75” (448mm) | See Xtender |
| Height | n/a | 16″ (406mm) | 16″ (406mm) | 16″ (406mm) | 16” (406mm) | See Xtender |
| Length | n/a | 48″ (1219mm) | 48″ (1219mm) | 48″ (1219mm) | 48” (1219mm) | See Xtender |
| Corbel Width | n/a | 13.5″ (343mm) | 15.25″ (387mm) | 17.25″ (438mm) | 19.25” (488mm) | See Xtender |
| Block Width | n/a | 11.75″ (298mm) | 13.5″ (343mm) | 15.5″ (394mm) | 17.5” (444mm) | See Xtender |
| Concrete Volume | n/a | 0.115yd3
(0.088m3) |
0.144yd3
(0.11m3) |
0.177yd3
(0.135m3) |
0.210yd3
(0.160m3) |
See Xtender |
| *Foam-to-foam dimensions shown, unless noted otherwise. | ||||||
| PRO Series | Platinum Series | |||||
| Wall Assembly R-value | R-25+ | R-28+ | ||||
